Robust design, up to 150m3/hour and
longer lifetime of the hoses with a competitive price.
From aggressive to shear-sensitive and viscous materials, the Albin Hose pumps
can handle the toughest applications. Albin Hose pumps offer tremendous fluid
transfer versatility, ranging from waste water to highly shear-sensitive
products. The pumps also offer excellent lift capabilities, high discharge
pressures and high precision dosing
Flow up to 70 m3/h!
The casing of pump is partially filled with adapted lubricant which
facilitates slip of mechanical pieces on pipe. The liquid pumped without
any contact with inner wall of pipe and can thus be aggressive and strongly
charged.
* Competitive prices
* Shoes as method of hose
compression for longer hose lifetime. Lower running costs and less service
* Casing and reducer
mounting by close coupling with seal to eliminate risk of fluid in the reducer
and minimize service.
* The hose mounting is
designed for easy maintenance and thereby reducing service costs
through time reduction.
ALH Working Principal
The
pumping movement is obtained by compression and relaxation of a specially designed
elastic hose. The hose is compressed between the internal wall of the pump and
the shoes. The pumped fluid is only in contact with the inside of the hose
wall.
The dimension of the particles must not exceed 15% of the interior diameter of
the hose.
The pump has neither joint nor valve.
The pump flow pulsate. The pump can
be supplied with a pulsation dampener.
The pump can be supplied with a pulsation dampener.
The pump house is partially filled with lubricant, thereby allowing smooth
running of the shoes on the hose.
